[ click to view product list ]
HYDRAULIC OIL 10W
DESCRIPTIO
Petromin Hydraulic Oil 10W is blended from high quality, chemically-stable solvent refined base oil and incorporated with balanced additive system which includes anti-wear and oxidation inhibitors. Utilization of Hydraulic oil 10W will provide excellent wear protection in hydraulic and circulation systems and good air release properties.

APPLICATIONS
Petromin Hydraulic Oil 10W is recommended for most types of hydraulic systems, moderatelyloaded gears and bearings lubricated by circulation, bath and ring oiling. They are recommended for use in silver coated components in any equipment.

BENEFITS

• Efficient anti-wear performance.

• Provide rust and corrosion protection.

• Minimize low temprature sludge build up.

• Hydrolytic stability.

Performance Level

  

Cincinnati Milacron ...............P-68

............................ P-69

............................ P-70Denison

 ....................................HF-O

 

Product Characteristics

  
PROPERTIES UNITS VALUE TEST METHOD
SAE Grade - 10W -
Specific Gravity @ 15 ºC

-

 0.877 ASTM D-4052
Viscosity @ 40 ºC

mm2/s

 35.0 ASTM D-445
  @ 100 ºC 

mm2/s

 5.7 ASTM D-445
Viscosity Index

-

 103 ASTM D-2270
Flash Point, COC ºC 232 ASTM D-92
Pour Point ºC -30 ASTM D-97
Color - 1.5 ASTM D-1500
Product Code - 2110 -
[ click to view product list ]
PETROMIN JOURNAL BEARING OIL 70
APPLICATIONS
Petromin Gear Oil HDC Petromin Journal Bearing Oil 70 is recommended for Journal Bearing lubrication (Hydro dynamic).



click image to enlarge >>
 
TYPICAL CHARACTERISTICS

ISO Grade 68
Specific Gravity at 15ºC 0.888
Viscosity: at 40ºC, cSt
at 100ºC, cSt
 68.4
8.7
Viscosity Index 100
Flash Point, ºC 246
Pour Point, ºC -30
Color, ASTM L 2.0
Product Code 5930
 
BENEFITS
1. Protection against rust and corrosion for longer period.
 
 
[ click to view product list ]
PETROMIN PEROCIRC OILS
APPLICATIONS
Petromin Perocirc Oils Petrocirc Oils are suitable for bearing and gear lubrication systems where the operating conditions are not severe. Recommended for use in re- circulating and other closed oil systems. Also suitable for rubber processing industry.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS

SAE Grade 32 46 68 100 150 220 320 460
Specific Gravity at 15ºC 0.874 0.879 0.883 0.888 0.893 0.898 0.904 0.908
Viscosity: at
40ºC, cSt
at 100ºC, cSt
 32.8
5.5		 45.5
6.8		 68.0
8.7		 100.3
11.3		 149.6
14.6		 219.5
18.8		 319.6
24.2		 460.0
30.2
Viscosity Index 103 103 99 98 96 96 96 96
Flash Point, ºC 225 235 239 248 250 252 260 270
Pour Point, ºC -12 -12 -12 -12 -9 -9 -9 -9
Color, ASTM 1.0 <1.5 1.5 2.0 L2.5 2.5 L3.0 3.0
Product Code 3210 3220 3230 3240 3250 3260 3270 3280

 
BENEFITS
1. Inherent oxidation stability.
2. Low volatility.
 
 
[ click to view product list ]
PETROMIN PROCESS OILS
APPLICATIONS
Petromin Process Oils Petromin Process Oils are suitable for bearing and gear lubrication systems where the operating conditions are not severe. Recommended for use in re-circulating and other closed oil systems. Mostly used as carrier oils in process industries such as rubber processing.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS

  20 32 BS
ISO Grade 20 32 460
Specific Gravity at 15ºC 0.863 0.874 0.907
Viscosity: at 40ºC, cSt
at 100ºC, cSt
 20.0
4.0		 32.0
5.5		 460.0
32.0
Viscosity Index 101 99 96
Flash Point, ºC 218 230 282
Pour Point,ºC -18 -12 -9
Color, ASTM 0.5 2.0 5.0
Product Code 5590 5560 5580

 
BENEFITS
1. Inherent oxidation stability.
2. Low volatility.
 
 
[ click to view product list ]
PETROMIN HEAT TRANSFER OIL
APPLICATIONS
Petromin Gear Oil HDC Petromin Heat Transfer Oil is recommended for systems operating at maximum bulk oil temperatures up to 215 ºC and where minimum shutdown temperatures are not below-10 ºC. It is particularly applicable where high heat transfer rates or high flow rates at reasonably low temperatures are required. It therefore withstands repeated thermal cycling. It is not recommended for open bath heating systems.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS

ISO Grade 22
Specific Gravity at 15ºC 0.865
Viscosity: at 40ºC, cSt
 		21.33
Viscosity Index 100
Flash Point, ºC 209
Free Point ºC 240
Color, ASTM 0.5
Pour Point, ºC -18
Product Code 5410
 
BENEFITS
1. Provides significant resistance to thermal cracking.
2. High heat transfer rates.
3. Protection against corrosion
4. Flexible for combined heating and cooling cycles.
 
 
[ click to view product list ]
PETROMIN QUENCHING OIL
APPLICATIONS
Petromin Quenching Oil Petromin Quenching Oil is a high-quality general-purpose heat treatment and quenching oil. It is recommended for use where maximum hardness is not required.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS

ISO Grade 22
Specific Gravity at 15ºC 0.8646
Viscosity: at 40ºC, cSt
at 100ºC, cSt
 21.33
4.2
Viscosity Index 100
Flash Point, ºC 209
Pour Point, ºC -18
Color, ASTM 0.5
Fire Point, ºC 240
Product Code 5420

 
BENEFITS
1. Efficient hardening characteristics.
2. High oxidation stability.
3. Long service life.
4. High flash point minimizes fire hazards and reduces smoke.
5. Can easily be removed from quenched parts.
 
 
[ click to view product list ]
PETROMIN SOLCUT
APPLICATIONS
Petromin Solcut Petromin Solcut is a general-purpose, soluble type cutting oil for use with water of normal hardness. The emulsion is prepared by adding oil to water and not vice versa. It is non-staining and can be used on both ferrous and non-ferrous metals in a wide variety of machining operations including grinding, milling, turning and drilling.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS

Specific Gravity at 15ºC 0.894
Viscosity: at 40ºC, cSt
at 100ºC, cSt
 30.6
5.6
Flash Point, ºC 132
Emulsion Test Pass
Product Code 5390
 
BENEFITS
1. Improved cooling.
2. Better surface finish.
3. Increased tool life.
4. Faster machining.
5. Biocide to prevent Bacteria growth.
 
 
[ click to view product list ]
PETROMIN ROCK DRILL OILs
APPLICATIONS
Petromin Rock Drill Oils Petromin Rock Drill Oils are recommended for all pneumatically operated rock drills, particularly those requiring heavy duty oils, and including those in which the rotation of the drill is independent of the percussion mechanism, utilizing a separate hydraulic or pneumatic motor with reduction gearing for rotation. The oils may be applied by hand-oiling or integral oil reservoirs, by airline oil or centralized lubrication systems.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS

  C
ISO Grade 150
Specific Gravity at 15ºC 0.889
Viscosity: at 40ºC, cSt
at 100ºC, cSt
 150.0
14.9
Viscosity Index 98
Flash Point, ºC 250
Pour Point, ºC -9
Color, ASTM 2.5
Rust Test Pass
Product Code 5481
 
BENEFITS
1. High film strength minimizes wear.
2. Effective lubricity reduces friction.
3. Effective lubrication in the presence of water.
4. Efficient rust and corrosion protection.
5. Minimum fog formation.
6. Bland, unobjectionable odor.
 
 
[ click to view product list ]
PETROMIN OPEN GEAR LUBE
APPLICATIONS
Petromin Open Gearlube Petromin Open Gear Lube is designed primarily as an all-purpose lubricant for open gears. It can be applied by several methods, including spray, drip feed, brush, paddle, caulking gun or force feed lubricator. It is important to keep containers tightly sealed to avoid diluent loss, as this will thicken the product to the point where it becomes difficult to pour from containers.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS

Specific Gravity at 15ºC 1.07
Viscosity with diluent : at 40ºC, cSt
 		1200
Viscosity (without diluent) At 100 ºC, cSt 500
Timken OK Load, lbs 35
Water Resistance Excellent
Film Tacky-Hard
Color Black
Product Code 0211
 
BENEFITS
1. Ease of application.
2. Wide choice of application methods.
3. Excellent protection of gear teeth under boundary conditions.
4. High resistance to water washing.
5. Film adhesiveness minimizes throw-off
6. Low lubrication costs.
 
PERFORMANCE
AGMA 251.02
[ click to view product list ]
PETROMIN TRANSFORMER OIL
APPLICATIONS
Petromin Transformer Oil Petromin Transformer Oil conforms to B.S. 148 / 1984 and IEC Specification 296 (82) and can be used as an insulating and cooling medium where oil of high thermal and oxidation stability is required. It is also suitable where good gas absorbing properties are necessary. Transformer oil 'B' meets class Transformer oil and I 'C' meets class II of BS 148 and IEC 296 specification. Applications: transfers oil immersed switch gear, circuit breakers, etc.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS

B C
Density at 20ºC 0.886 0.848
Viscosity: at 40ºC, cSt
 		11.0 10.5
Pour Point, ºC -30 -45
Flash Point, ºC 148 130
Dielectric DissipationFactor at 90 ºC (max) 0.005 0.005
Dielectric Strength:(Break Down Voltage)
Untreated kV
Treated, kV
30 min
50 min
30 min.
50 min
Neutralization No. mg KOH/g (max) 0.03 0.03
Water content (PPM) <20 <20
Product Code 5461 5411
 
BENEFITS
1. High dielectric strength.
2. Very low pour point
3. Free from acids and corrosive sulfur.
4. Compatible with transformer construction materials.
 
PERFORMANCE
Meets IEC 296 (1982)
BS 148 (1984)
[ click to view product list ]
PETROMIN REFRIGERATION OILS
APPLICATIONS
Petromin Refridgeration Oils Petromin Refrigeration Oils are suitable for most types of refrigerants (except sulfur-dioxide) and in all types of refrigeration systems. The two Petromin Refrigeration Oils cover almost the entire range of modern refrigeration compressor requirements (except sulfur-dioxide) down to an evaporation temperature of -62 ºC.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS

L-32 HM-68
ISO Grade 32 68
Specific Gravity at 15ºC 0.885 0.919
Viscosity: at 40ºC, cSt
at 100ºC, cSt
 31.5
4.8		 65.5
7.2
Flash Point, ºC 175 191
Pour Point, ºC -39 -33
Neutralization No.mg KOH/g 0.03 0.03
Freon-12 Floc Point, deg.C -33 -30
Product Code
5451
5441
 
BENEFITS
1. Effective oxidation resistance.
2. Resistance of foaming.
3. Resistance to deposit formation.
4. Minimal compressor valve maintenance.
5. Sustained high condenser efficiency.
 
 
 
[ click to view product list ]
PETROMIN COMPRESSOR OILS
APPLICATIONS
Petromin Compressor Oils Petromin Compressor Oils are specially suited for Single-stage reciprocating compressors up to 125 PSI, Two-stage reciprocating compressors up to 300 PSI and Multi-stage reciprocating compressors after break-in with air discharge temperature up to 220 ºC.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS
 
ISO Grade 32 46 68 100
Specific Gravity at 15ºC 0.878 0.879 0.884 0.888
Viscosity: at 40ºC, cSt
at 100ºC, cSt
 30.0
5.3		 46.0
6.6		 68.0
8.8		 100.0
11.0
Viscosity Index 95 100 102 95
Flash Point, ºC 210 242 248 255
Pour Point, ºC -12 -9 -9 -12
Color, ASTM 1.0 1.5 2.0 2.5
Rust Test Pass Pass Pass Pass
CRC % mass of 20%Distillation (DIN 51356) 0.3 0.3 0.3 0.3
Product Code
5471
5321
5901
5431
 
BENEFITS
1. Longer intervals between cleaning of valves, heat exchangers, port and piping ensure lower maintenance cost..
2. Less carbon and deposit formation reduces fire and explosion hazards.
3. Single oil lubricates cylinders and crankcase
4. Suitable for both large and small compressors.
 
PERFORMANCE
DIN 51506 VDL
[ click to view product list ]
PETROMIN TURBINE OIL C
APPLICATIONS
Petromin Turbine Oil C Petromin Turbine Oils C are circulating oils suited for lubrication of gears and bearings in a wide variety of machinery applications.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS
 
ISO Grade 150 220 320 460
Specific Gravity at 15ºC 0.894 0.898 0.902 0.907
Viscosity: at 40ºC, cSt
at 100ºC, cSt
 149.0
14.5		 209.6
19.3		 321.5
23.8		 441
30.2
Viscosity Index 96 100 95 95
Flash Point, ºC 274 284 288 298
Pour Point, ºC -6 -6 -6 -6
Color, ASTM 2.5 3.0 3.0 L 4.5
Neutralization No.,mg KOH/g 0.09 0.09 0.09 0.09
Product Code 5260 5270 5280 5290
 
BENEFITS
1. Protection against rust and corrosion.
2. Good resistance to thermal degradation.
 
PERFORMANCE
AGMA 250.04
David Brown
[ click to view product list ]
PETROMIN TURBINE OIL GE 32
APPLICATIONS
Petromin Turbine Oil GE 32 Petromin Turbine Oil GE 32 is specially designed to satisfy the very high thermal anti-oxidation demands of modern high output General Electric Gas Turbines, Frame 7000 and Frame 9000 units.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS

ISO Grade 32
Specific Gravity at 15ºC 0.865
Viscosity: at 40ºC, cSt
at 100ºC, cSt
 32.1
5.5
Viscosity Index 100
Flash Point, ºC 232
Pour Point, ºC -12
Color, ASTM 1.0
Neutralization No.mg KOH/g 0.16
Air release @ 50 ºC minutes (max) 3.0
Oxidation stability Hrs to2.0 Acid number (min) 5000
Product Code
5251
 
BENEFITS
1. Excellent oxidation stability.
2. Effective protection against air entrainment.
3. Protection against rust and corrosion for long periods.
4. Efficient demulsibility for rapid separation from water.
 
PERFORMANCE
GE GEK 32568A and C
BS 489 - 1999
DIN 51515 - PART 1
DIN 51517 - PART 2
[ click to view product list ]
PETROMIN TURBINE OIL T
APPLICATIONS
Petromin Turbine Oil T Petromin Turbine Oils T are suitable for use in water and steam turbines bearing lubrication and cooling which require mineral turbine oils. In addition, Petromin Turbine Oils T promote outstanding performance in hydraulic systems, gear cases, bearing and other industrial units.
click image to enlarge >>
 
TYPICAL CHARACTERISTICS

ISO Grade 32 46 68 100
Specific Gravity at 15ºC 0.874 0.879 0.884 0.889
Viscosity: at 40ºC, cSt
at 100ºC, cSt
 31.4

5.4		 46.4

6.7		 69.2

8.9		 99.9

11.3
Viscosity Index 104 103 102 99
Flash Point, ºC 220 242 248 264
Pour Point, ºC -12 -9 -9 -9
Color, ASTM 1.5 1.5 L 2.0 2.5
Neutralization No.,mg KOH/g 0.09 0.09 0.09 0.09
Zinc, PPM (max) 10 10 10 10
Oxidation stability Hrs to2.0 Acid number (min) 2500 2500 2000 -
Product Code
5170
5180
5190
5200

 
BENEFITS
1. Excellent water separation.
2. Very high oxidation stability.
3. Long service life.
4. Effective anti-foam properties.
 
PERFORMANCE
AGMA