Petromin Oils | Products | Diesel Engine Oils

[ click to view product list ]

PETROMIN FLEETMASTER LD

APPLICATIONS

PETROMIN FLEET MASTER LD is mixed fleet engine oil for heavy-duty diesel vehicles and passenger cars. Its long drain capability meets the requirement of VOLVO, SCANIA, MAN, MERCEDES-BENZ, IVECO, RVI/MACK, CATERPILLAR, RENAULT and CUMMINS manufacturers. It is recommended engine oil for both on-highway and off-highway vehicles fitted with new engines for low emissions and old engines of conventional design fuelled by low and high sulfur diesel fuels.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	15W40
Specific Gravity at 15ºC	0.890
Viscosity: at 40ºC, cSt at 100ºC, cSt	111.40 15.50
Viscosity Index	147
Flash Point, ºC	226
Pour Point, ºC	-27
Color, ASTM	3.5
Sulfate Ash, % mass	1.5
TBN, mg KOH/g	12.3
Product Code	2960

BENEFITS

1· Mixed fleet engine oil for American, European and Japanese vehicles.
2. Universal engine oil for old and new diesel engine fuelled by both high and low sulfur diesel.
3. Proven field-tested engine oil with extended drain period capability
4· Excellent TBN retention for high sulfur diesel fuel operation.
5. Effective control over high temperature piston deposits and soot accumulation.

PERFORMANCE

API CH4 / CG4 / CF4 / SJ
ACEA E3 / B3 / A3 - 98
MB 228.3 / 229.1
MAN 271
VOLVO VDS 2
MACK EO - L
VW 501.01 / 505.00
CUMMINS CES 20072
ALLISON C4

[ click to view product list ]

PETROMIN SUPERFLEET DD

APPLICATIONS

Petromin Superfleet DD is recommended for automotive as well as stationary engines requiring an API Service Category CF-2 / CD II Oil. Petromin Superfleet DD Oil is low ash (below 1.0% mass) and meets the 2-cycle Detroit Diesel recommendations.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	40	30
Specific Gravity at 15ºC	0.902	0.893
Viscosity: at 40ºC, cSt at 100ºC, cSt	147.9 15.6	93.5 11.0
Viscosity Index	109	108
Flash Point, ºC	248	245
TBN, mg KOH/g	7.5	7.5
Sulfate Ash, % mass	0.996	0.996
Product Code	1980	1970

BENEFITS

1. A low ash product suitable for use in 2-cycle diesel engines.
2. Protection against mechanical wears and deposits.
3. Versatile with superior performance in two and four stroke cycle diesel engines.

PERFORMANCE

API CF-2, CD II, CD
MIL-L-2104D
CAT TO-2
ALLISON C3

[ click to view product list ]

PETROMIN ENGINE OILS RR

APPLICATIONS

Zinc-free marine and railroad diesel engine oils are recommended for use in high output diesel engines and also in some power generating sets. It is recommended for two-stroke cycle diesel engines as per General Motors EMD specification, Caterpillar DI engines and ALCO diesel engines.

click image to enlarge >>

TYPICAL CHARACTERISTICS

RR	4013	4016	4020
SAE Grade	40	40	40
Specific Gravity at 15ºC	0.902	0.904	0.906
Viscosity: at 40ºC, cSt at 100ºC, cSt	147.6 14.9	147.0 15.0	146.7 15.0
Viscosity Index	101	102	102
Flash Point, ºC	270	274	276
Pour Point, ºC	-6	-6	-6
Color, ASTM	4.0	4.5	5.5
Sulfate Ash, % mass	1.513	1.714	1.928
TBN, mg KOH/g	13.0	16.0	20.0
Zinc Content, PPM (max)	10.0	10.0	10.0
Product Code	2480	2490	2500

BENEFITS

1. Excellent oxidation stability.
2. Good alkalinity retention.
3. Excellent protection of silver-coated and turbocharger bearings of EMD engines.
4. Suitable for railroad and marine engines which require zinc-free oils.

PERFORMANCE

API CD
GEK-71435A, GEK-5180F
LMOA GENERATION IV
GENERAL MOTORS EMD MI 1761
ALCO

[ click to view product list ]

PETROMIN DEO HD

APPLICATIONS

Petromin DEO HD oils are recommended for automotive diesel engines in trucks, vans, pick-ups and buses as well as in stationary engines where API Service Category CF is required. They are also recommended as a hydraulic fluid in construction equipment in the appropriate viscosity grade.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	20	30	40	50
Specific Gravity at 15ºC	0.889	0.896	0.902	0.905
Viscosity: at 40ºC, cSt at 100ºC, cSt	56 7.8	94.6 11.0	159.5 15.0	196.1 18.5
Viscosity Index	105	101	97	105
Flash Point, ºC	224	235	244	250
Pour Point, ºC	-24	-18	-15	-12
Color, ASTM	2.0	L 3.0	3.0	3.5
Sulfate Ash, % mass	1.3	1.3	1.3	1.3
TBN, mg KOH/g	10.5	10.5	10.5	10.5
Product Code	1920	1930	1940	1950

BENEFITS

1. Cleaner engines.
2. Protection against mechanical wears.
3. Protection against low-temperature rusting and corrosive wear

PERFORMANCE

API CF

[ click to view product list ]

PETROMIN DEO CD

APPLICATIONS

Petromin DEO CD oils are recommended for use in high-output diesel engines where service factors require this quality of oil. It is suitable for Caterpillar pre-combustion type engines and other diesel engines using high sulfur fuel.

click image to enlarge >>

TYPICAL CHARACTERISTICS

DEO CD	316	320	416	420
SAE Grade	30	30	40	40
Specific Gravity at 15ºC	0.897	0.903	0.905	0.905
Viscosity: at 40ºC, cSt at 100ºC, cSt	98.0 11.2	91.8 11.0	147.5 15.0	143.2 15.0
Viscosity Index	98	105	103	105
Flash Point, ºC	236	238	242	255
Pour Point, ºC	-21	-21	-21	-21
Color, ASTM	3.5	3.0	3.0	3.0
Sulfate Ash, % mass	1.80	2.27	1.80	2.27
TBN, mg KOH/g	16.2	2.03	16.2	20.5
Product Code	2410	2430	2420	2440

BENEFITS

1. Excellent protection against corrosive wear in severe diesel service..
2. Minimize rust and corrosion.
3. Good detergent and dispersant properties.
4. Contains high alkalinity reserve.

PERFORMANCE

API CF

[ click to view product list ]

PETROMIN DEO HD 2

APPLICATIONS

Petromin DEO HD 2 oils are recommended for use in diesel engines either naturally aspirated or super-charged. They provide good performance under conditions of high-speed, high load, high-temperature operation which require API Service Category CF quality oil.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	10W	20	30	40	50
Specific Gravity at 15ºC	0.880	0.885	0.893	0.898	0.902
Viscosity: at 40ºC, cSt at 100ºC, cSt	34.5 5.8	53.4 7.6	94.5 11.0	145.7 15.0	199.2 18.5
Viscosity Index	110	106	101	103	103
Flash Point, ºC	230	236	250	255	270
Pour Point, ºC	-27	-27	-18	-18	-15
Color, ASTM	2.0	2.0	2.5	3.0	3.5
Sulfate Ash, % mass	0.915	0.915	0.915	0.915	0.915
TBN, mg KOH/g	7.4	7.4	7.4	7.4	7.4
Product Code	2210	2220	2230	2240	2250

BENEFITS

1. Improved control over high-temperature varnish deposits.
2. Minimize low temperature sludge build-up.
3. Good protection against rust and corrosion…

PERFORMANCE

API CF

[ click to view product list ]

PETROMIN SUPER DIESEL HD3

APPLICATIONS

Petromin Super Diesel HD 3 oils are recommended for use in high-output diesel engines fitted in automotive, agricultural and construction equipment, operating in fleet and contractor service where relatively high sulfur fuel content or other severe service factors require this quality of oil.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	10W	20	30	40	50
Specific Gravity at 15ºC	0.882	0.888	0.896	0.902	0.905
Viscosity: at 40ºC, cSt at 100ºC, cSt	36.0 5.9	56.0 7.8	94.6 11.0	159.9 15.0	196.1 18.5
Viscosity Index	109	105	101	97	100
Flash Point, ºC	212	225	235	250	250
Pour Point, ºC	-27	-24	-18	-15	-12
Color, ASTM	2.5	2.5	3.0	3.0	3.5
Sulfate Ash, % mass	1.3	1.3	1.3	1.3	1.3
TBN, mg KOH/g	10.5	10.5	10.5	10.5	10.5
Product Code	2310	2320	2330	2340	2350

BENEFITS

1. Excellent protection against the effects of high-sulfur fuels.
2. Good control of high temperature deposits
3. Improved resistance to ring sticking, ring and cylinder wear, valve and combustion deposits.
4. Long engine life.
5. Suitable for mixed fleet operation.

PERFORMANCE

API CF
CATERPILLAR TO-2
ALLISON C-3

[ click to view product list ]

PETROMIN DIESEL GOLD

APPLICATIONS

Petromin Diesel Gold is recommended for use in high output diesel engines in commercial vehicles where manufacturers' specifications require API CF performance level oil.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	15W-40	20W-40	20W-50
Specific Gravity at 15ºC	0.894	0.903	0.894
Viscosity: at 40ºC, cSt at 100ºC, cSt	111.8 15.0	134.9 15.1	163.3 17.9
Viscosity Index	139	115	120
Flash Point, ºC	240	240	244
Pour Point, ºC	-24	-24	-24
Color, ASTM	2.5	3.0	3.0
Sulfate Ash, % mass	1.32	1.32	1.32
TBN, mg KOH/g	11.0	11.0	11.0
Product Code	2780	2770	2790

BENEFITS

1. Good control over high temperature deposits.
2. Improved fuel economy.
3. Good control over low temperature sludge
4. Eliminates seasonal oil changes.
5. Reduces oil consumption.

PERFORMANCE

AP CF

[ click to view product list ]

PETROMIN DIESEL SPECIAL SHPD

APPLICATIONS

Petromin Diesel Special SHPD is recommended for use in modern highly rated diesel engines installed in construction, transport, agriculture and other heavy-duty equipment.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	15W-40
Specific Gravity at 15ºC	0.8964
Viscosity: at 40ºC, cSt at 100ºC, cSt	125.4 15.0
Viscosity Index	123
Flash Point, ºC	240
Pour Point, ºC	-24
Color, ASTM	3.0
Sulfate Ash, % mass	1.94
TBN, mg KOH/g	16.0
Product Code	2890

BENEFITS

1. Reduced bore polishing.
2. Excellent protection against corrosive wear caused by high-sulfur fuels.
3. Extended engine life
4. Improved resistance to ring sticking, ring and cylinder liner wear, valve and combustion deposits.
5. Improved fuel economy.
6. Reduced oil consumption

PERFORMANCE

API CF

[ click to view product list ]

PETROMIN TURBODIESEL C

APPLICATIONS

Petromin Turbodiesel C are mixed fleet high performance oils for use in heavy duty and high speed diesel engines and are particularly suited for on-highway, heavy duty truck applications. They can also be used where API CE oils are recommended.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	15W-40
Specific Gravity at 15ºC	0.894
Viscosity: at 40ºC, cSt at 100ºC, cSt	112.0 15.0
Viscosity Index	140
Flash Point, ºC	220
Pour Point, ºC	-27
FZG load carrying capacity failure state	3.5
Sulfate Ash, % mass	1.35
TBN, mg KOH/g	10.5
Product Code	2860

BENEFITS

1. Can be used year round.
2. Maintains high engine cleanliness.
3. Greater control of deposit formations..
4. Prolonged oil life due to high oxidation stability at high temperatures.
5. Excellent shear stability; maintains its viscosity grade
6. Protects against rust, wear, and sludge formation frequencies
7. Suitable for mixed fleet operation

PERFORMANCE

API CF4
MAN 271
ACEA E2-96
VOLVO VDS
MERCEDES BENZ 228.1
ALLISON C4
MACK E0-K/2

[ click to view product list ]

PETROMIN SUPERFLEET LDM

APPLICATIONS

Petromin Superfleet LDM is a monograde Super High Performance Diesel (SHPD) engine oil suitable for use in a variety of highly rated turbocharged and naturally aspirated high-speed diesel engines. It can also be used for some types of gasoline engines, making it ideal in mixed fleet operations. It has the long-drain-oil characteristics and maintains performance features throughout its service life.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	40
Specific Gravity at 15ºC	0.905
Viscosity: at 40ºC, cSt at 100ºC, cSt	146.4 15.0
Viscosity Index	103
Flash Point, ºC	230
Pour Point, ºC	-18
Color, ASTM	6.5
Sulfate Ash, % mass	2.26
TBN, mg KOH/g	18.3
Product Code	2200

BENEFITS

1. Extends overhaul intervals.
2. Effective control on bore polishing.
3. Allows extended oil drain period.
4. Maintains excellent engine cleanliness.
5. Outstanding thermal stability.
6. Maximum control of piston deposits and ring sticking.
7. Suitable for mixed fleet operations.

PERFORMANCE

API CE / SJ
MERCEDEZ BENZ 228.2
Allison C4
CAT TO-2
MAN 270

[ click to view product list ]

PETROMIN SUPER FLEET LD

APPLICATIONS

Petromin Superfleet LD is a Super High Performance Diesel (SHPD) engine oil suitable for use in a variety of highly rated turbocharged and naturally aspirated high-speed diesel engines. It can also be used for some types of gasoline engines, making it ideal for mixed fleet operations. It has the long-drain-oil characteristic and maintains performance features throughout its service life.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	15W40
Specific Gravity at 15ºC	0.892
Viscosity: at 40ºC, cSt at 100ºC, cSt	115. 3 15. 5
Viscosity Index	141
Flash Point, ºC	250
Pour Point, ºC	-30
Color, ASTM	6.5
Sulfate Ash, % mass	2.26
TBN, mg KOH/g	18.1
Product Code	2000

BENEFITS

1. Extends overhaul intervals.
2. Effective control on bore polishing.
3. Low and controlled oil consumption temperatures.
4. Allows extended oil drain period.
5. Maintains excellent engine cleanliness.
6. Outstanding thermal stability.
7. Excellent shear stability, stays in grade throughout service life.
8. Maximum control of piston deposits and ring sticking.
9. Suitable for mixed fleet operations.

PERFORMANCE

API CG4/CF4/SJ
ACEA E3-96/B3-96/A3-96
Mercedes-Benz 228.3
VOLVO VDS
MTU TYPE 2
Allison C4
CAT TO-2

[ click to view product list ]

Petromin Fleetmaster LD

DESCRIPTION

Petromin Fleetmaster LD is a premium top quality automotive engine oil meeting obsolete, current and future engine oil performance level, particularly European and American standards. It is an ideal mixed fleet engine oil meeting API CH4/SL and ACEA E3 / E2 / A3 / B3 / B4. The additive chemistry used in manufacturing Petromin Fleetmaster LD has proven its performance in the field.

APPLICATIONS

Petromin Fleetmaster LD is mixed fleet engine oil for heavy-duty diesel vehicles and passenger cars. Its long drain capability meets the requirement of VOLVO, SCANIA, MAN, MERCEDESBENZ, RVI/MACK, CATERPILLAR, RENAULT and CUMMINS manufacturers. It is recommended for both on-highway and off-highway vehicles fitted with new engines for low emissions and old engines of conventional design fuelled by low and high sulfur diesel fuels.

BENEFITS

• Mixed fleet engine oil for American, European and Japanese vehicles.
• Universal engine oil for old and new diesel engine fuelled by both high and low sulphur diesel.
• Proven field-tested engine oil with extended drain period capability.
• Excellent TBN retention for high sulphur diesel fuel operation.
• Effective control over high temperature piston deposits and soot accumulation.

PPERFORMANCE LEVEL

API ..... CH4 / CG4 / CF4 / SL
ACEA .. E3 / E2 / A3 / B3 / B4
CAT ............................ ECF-1
MB .....................228.3/229.1 MAN ..........................M 3275
VOLVO ....................... VDS-2
MACK ........................ EO - M
VW ................501.01/505.00 CUMMINS .... CES 20072 / 71
ALLISON ........................ C-4
Renault Trucks........ RD / RD2
MTU / DDC .................. type 2

PRODUCT CHARACTERISTICSDUCT CHARACTERISTICS

PROPERTIES
UNITS VALUE TEST METHOD

SAE Grade
- 15W-40 -

Specific Gravity
@ 15 ºC -