Petromin Oils | Products

[ click to view product list ]

PETROMIN PETROCYL

APPLICATIONS

Petrocyl oils are recommended as a cylinder lubricant for all types of slow speed cross-head two stroke diesel engines using high sulfur fuels particularly the long stroke, high BMEP types.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	70	85
Specific Gravity at 15ºC	0.937	0.945
Viscosity: at 40ºC, cSt at 100ºC, cSt	214.0 19.75	206.6 19.78
Viscosity Index	106	108
Flash Point, ºC	280	242
Pour Point, ºC	-6	-6
Color ASTM	6.0	L 7.5
TBN, mg KOH/g	70.0	90.0
Sulfate Ash, % mass	7.75	8.8
Product Code	4750	4780

BENEFITS

1. Reduced engine wear rates.
2. Good demulsibility properties.
3. Reduced maintenance costs.

PERFORMANCE

Approved by major marine engine manufacturers for use in their cross head slow speed diesel engines. (MAN B&W, MITSUBISHI HEAVY INDUSTRIES (MHI) and WARTSILA NSD).

[ click to view product list ]

PETROMIN PETROSHIELD SPECIAL

APPLICATIONS

Petroshield Special are recommended primarily for use in high out-put corss-head diesel engines in marine service, particularly those requiring system oil for piston cooling. In these applications, they will prevent or reduce deposit formation in piston cooling spaces, maintain piston-cooling efficiency and reduce the incidence of piston crown cracking. Also recommended as crankcase oil in auxiliary engines.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	30	40
Specific Gravity at 15ºC	0.891	0.898
Viscosity: at 40ºC, cSt at 100ºC, cSt	92.8 10.7	152.7 15.0
Viscosity Index	102	95
Flash Point, ºC	262	267
Pour Point, ºC	-6	-9
TBN, mg KOH/g	7.0	7.0
Sulfate Ash, % mass	0.9	0.9
Color, ASTM	2.5	L 4.0
Product Code	4100	4110

BENEFITS

1. Reduce deposits on piston and crankcase surfaces.
2. Enhance piston-cooling efficiency.
3. Increase protection against bearing corrosion.
4. Provide improved rust protection.
5. Provide effective water tolerance and separation.

PERFORMANCE

Approved by major marine engine manufacturers for use in their cross-head slow speed diesel engines. (MAN B&W, MITSUBISHI HEAVY INDUSTRIES (MHI) and WARTSILA NSD).

[ click to view product list ]

PETROMIN PETROSHIELD MG

APPLICATIONS

Petroshield MG is intended primarily for lubricating cylinders and bearings of engines operating on distillate fuels particularly in navel applications and as a crankcase lubricant in large cross-head type diesel engines operating on residual or high-sulfur fuels. It is recommended for cylinders and bearings of medium-to low-speed diesel engines in naval vessels where oil meeting US Military Specification MIL-L-9000H is required.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	40
Specific Gravity at 15ºC	0.898
Viscosity: at 40ºC, cSt at 100ºC, cSt	114.5 12.8
Viscosity Index	105
Flash Point, ºC	259
Pour Point, ºC	-14
TBN, mg KOH/g	14.2
Sulfate Ash, % mass	1.75
Product Code	4120

BENEFITS

1. Outstanding oxidation stability at elevated temperatures.
2. Superior protection against wear and corrosion.
3. Excellent detergent and dispersant characteristics.
4. Exceptional resistance to deposit formation.
5. Good reserve alkalinity.

PERFORMANCE

AMIL-L-9000H

[ click to view product list ]

PETROMIN DEO CFM

APPLICATIONS

Petromin DEO CDM is suitable for high-output, medium speed diesel engines operating on high-sulfur distillate fuels and where effective water separation properties are also required.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	40
Specific Gravity at 15ºC	0.909
Viscosity: at 40ºC, cSt at 100ºC, cSt	148.57 15.0
Viscosity Index	98
Flash Point, ºC	254
Pour Point, ºC	-6
FZG load carrying capacity failure state	12
Color, ASTM	4.5
TBN, mg KOH/g	20.0
Sulfate Ash, % mass	2.5
Product Code	2700

BENEFITS

1. Provides excellent protection against wear in severe diesel service..
2. Minimizes rust and corrosion.
3. Provides high alkalinity reserve.
4. Effective water separation properties.
5. Controls black sludge deposits thus increasing oil filter life/cleaning frequencies.
6. Meets API CD performance requirement.

PERFORMANCE

API CF
Meets major marine engine manufacturers' requirements for use in their diesel engines

[ click to view product list ]

PETROMIN DEO CDM

APPLICATIONS

Petromin DEO CDM is suitable for high-output, medium speed diesel engines operating on high-sulfur distillate fuels and where effective water separation properties are also required.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	40
Specific Gravity at 15ºC	0.906
Viscosity: at 40ºC, cSt at 100ºC, cSt	155.9 15.0
Viscosity Index	98
Flash Point, ºC	254
Pour Point, ºC	-6
FZG load carrying capacity failure state	12
Color, ASTM	4.5
TBN, mg KOH/g	20.9
Sulfate Ash, % mass	2.6
Product Code	2580

BENEFITS

PERFORMANCE

API CF
Meets major marine engine manufacturer requirements for use in their diesel engines.

[ click to view product list ]

PETROMIN PETROPOWER 2000

APPLICATIONS

Petropower 2000 are recommended as diesel engine oil for KHD Deutz (16M 640 models), MAN B&W engines working on severe duty high BMEP where cylinder liner lacquer control is more important.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	40
Specific Gravity at 15ºC	0.902
Viscosity: at 40ºC, cSt at 100ºC, cSt	146.2 15.0
Viscosity Index	96
Flash Point, ºC	260
Pour Point, ºC	-9
FZG load carrying capacity failure state	12
TBN, mg KOH/g	13
Color ASTM	L 3.5
Product Code	2070

BENEFITS

1. Extended engine overhauls.
2. Reduced Bore polishing.
3. Excellent wear protection.
4. Better engine cleanliness.

PERFORMANCE

API CF

[ click to view product list ]

PETROMIN PETROPOWER 1

APPLICATIONS

Petropower 1 Oil are recommended for crankcase lubrication in medium-speed marine type diesel engines. They can also be used for separate bearing lubrication and piston cooling of large crosshead type engines under severe service conditions at appropriate viscosity grades. Meets the requirement of WARTSILA, CATERPILLER (3600 SERIES), MTU, MWM, RUSTON, MAN (B&W), KHD-DEUTZ, PIELSTICK, NIGATA, MAK, YANMAR, DAIHATSU, MIRLESS BLACKSTONE and COCKERILL engine builders.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	30	40	50
Specific Gravity at 15ºC	0.900	0.903	0.906
Viscosity: at 40ºC, cSt at 100ºC, cSt	107.7 11.9	148.1 15.0	226.5 19.8
Viscosity Index	99	101	100
Flash Point, ºC	240	262	265
Pour Point, ºC	-9	-9	-9
FZG load carrying capacity failure state	12	12	12
Sulfate Ash, % mass	1.82	1.82	1.82
TBN, mg KOH/g	15.0	15.0	15.0
Product Code	2600	2610	2620

BENEFITS

1. Reduced port and under crown deposits.
2. Cleaner engine operation.
3. Increased protection against cylinder and bearing wear.
4. Meets API CF requirements.
5. Controls black sludge deposits thus increasing oil filter life/cleaning frequencies
6. Excellent TBN retention with low oil consumption

PERFORMANCE

API CF Meets major marine engine manufacturers' requirements for use in their medium speed engines.

[ click to view product list ]

PETROMIN PETROPOWER 2

APPLICATIONS

Petropower 2 Oils are primarily recommended for use in high-output trunk piston marine diesel engines operating on heavy residual fuels (sulfur up to 2.5%). They are suitable for four-stroke high BMEP medium speed diesel engines. Meets the requirement of WARTSILA, MAN (B&W), KHD-DEUTZ, PIELSTICK, NIGATA, MAK, YANMAR, DAIHATSU, MIRLESS BLACKSTONE and COCKERILL engine builders.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	30	40	50
Specific Gravity at 15ºC	0.980	0.911	0.916
Viscosity: at 40ºC, cSt at 100ºC, cSt	100.4 11.7	146.1 15.0	226.0 19.9
Viscosity Index	99	103	101
Flash Point, ºC	244	260	265
Pour Point, ºC	-6	-6	-6
FZG load carrying capacity failure state	12	12	12
Sulfate Ash, % mass	3.71	3.71	3.71
TBN, mg KOH/g	30.0	30.0	30.0
Color ASTM	8.0	8.0	D8.0
Product Code	2630	2640	2650

BENEFITS

1. Excellent TBN retention, with low oil consumption.
2. Cleaner pistons, ports and cylinders, thus extending overhauls.
3. Fast separation from water in case of water contamination.
4. Extended oil life and drain intervals.
5. Low under crown deposits
6.Controls back sludge deposits, thus increase oil filter life / cleaning frequencies

PERFORMANCE

API CF Meets major marine engine manufacturers' requirements for use in their medium speed engines.

[ click to view product list ]

PETROMIN PETROPOWER 3

APPLICATIONS

Petropower 3 Oils are primarily recommended for use in high-output trunk piston marine diesel engines operating on heavy residual fuels (sulfur up to 2.5%). They are suitable for four-stroke high BMEP medium speed diesel engines. Meets the requirement of WARTSILA, MAN (B&W), KHD-DEUTZ, PIELSTICK, NIGATA, MAK, YANMAR, DAIHATSU, MIRLESS BLACKSTONE and COCKERILL engine builders.

TYPICAL CHARACTERISTICS

SAE Grade	30	40	50
Specific Gravity at 15ºC	0.913	0.916	0.919
Viscosity: at 40ºC, cSt at 100ºC, cSt	97.4 11.8	152.2 15.0	205.1 19.5
Viscosity Index	102	100	104
Flash Point, ºC	242	255	265
Pour Point, ºC	-9	-9	-6
FZG load carrying capacity failure state	12	12	12
Sulfate Ash, % mass	4.6	4.6	4.6
TBN, mg KOH/g	40.0	40.0	40.0
Color ASTM	8.0	8.0	D8.0
Product Code	2670	2680	2690

BENEFITS

1. Excellent TBN retention with low oil consumption.
2. Cleaner pistons, ports and cylinders, thus extending overhauls.
3. Fast separation from water in case of water contamination.
4. Extended oil life and drain intervals.
5. Low under crown deposits
6.Controls back sludge deposits, thus increase oil filter life / cleaning frequencies

PERFORMANCE

API CF Meets major marine engine manufacturers' requirements for use in their medium speed engines.

[ click to view product list ]

PETROMIN PETROSHIELD 1

APPLICATIONS

Petroshield 1 oils are recommended for crankcase lubrication in medium-speed marine type diesel engines. They can also be used for separate bearing lubrication and piston cooling of large cross-head type engines under severe service conditions at appropriate viscosity grades.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	30	40	50
Specific Gravity at 15ºC	0.896	0.901	0.909
Viscosity: at 40ºC, cSt at 100ºC, cSt	101.1 11.8	145.2 15.0	232.9 19.8
Viscosity Index	100	104	97
Flash Point, ºC	262	266	272
Pour Point, ºC	-9	-6	-6
Color, ASTM	4.0	4.5	5.0
Sulfate Ash, % mass	1.6	1.6	1.6
TBN, mg KOH/g	15.0	15.0	15.0
Product Code	4130	4140	4150

BENEFITS

1. Reduced port and under crown deposits.
2. Cleaner engine operation.
3. Increased protection against cylinder and bearing wear.
4. 4. Meets API CD requirements.

PERFORMANCE

API CD
Meets major marine engine manufacturers requirements for use in their medium speed engines.

[ click to view product list ]

PETROMIN PETROSHIELD 2

APPLICATIONS

Petroshield 2 oils are primarily recommended for use in high-output trunk piston marine diesel engines operating on heavy residual fuels (sulfur up to 2.5%). They are suitable for four-stroke cycle engines.

click image to enlarge >>

TYPICAL CHARACTERISTICS

SAE Grade	30	40	50
Specific Gravity at 15ºC	0.909	0.913	0.918
Viscosity: at 40ºC, cSt at 100ºC, cSt	102.4 11.9	145.1 15.0	224.3 19.7
Viscosity Index	104	104	100
Flash Point, ºC	246	260	276
Pour Point, ºC	-9	-6	-6
Color, ASTM	4.0	4.5	5.0
Sulfate Ash, % mass	3.6	3.6	3.6
TBN, mg KOH/g	30.0	30.0	30.0
Product Code	4230	4240	4290

BENEFITS

1. Neutralize combustion acids.
2. Maintain alkalinity in service.
3. Good demulsibility.
4. Control ring and liner wear.

PERFORMANCE

API CD
Meets major marine engine manufacturers requirements for use in their medium speed engines. .

[ click to view product list ]

Petromin Petrocyl

DESCRIPTION

Petrocyl Oil Series is superior, high-alkaline, cross-head engine oils, developed specifically for lubrication of modern, high output cross-head type engines using high sulphur fuels exceeding 4% by weight.
Petrocyl oils are formulated from high-quality base stocks with selected additives to provide optimum oxidation resistance at high temperatures. They also provide high levels of detergency, alkalinity and load-carrying ability to meet the performance requirements of modern cross-head type slow speed two stroke marine diesel engines.

APPLICATIONS

Petrocyl Oil Series is recommended as a cylinder lubricant for all types of slow speed cross-head two stroke diesel engines using high sulphur fuels particularly the long stroke, BMEP types.

BENEFITS

• Reduced engine wear rates.

• Good demulsibility properties.

• Reduced maintenance costs.

PPERFORMANCE LEVEL

Approved by major marine
engine manufacturers
MAN B&W
MITSUBISHI HEAVY
INDUSTRIES (MHI)
WARTSILA NSD

PRODUCT CHARACTERISTICS

PROPERTIES

UNITS

VALUE

TEST METHOD

Series		-	70	85	-
SAE Grade		-	50	50	-
Specific Gravity	@ 15 ºC	-	0.937	0.945	ASTM D-4052
Viscosity	@ 40 ºC	mm2/s	208.0	207.0	ASTM D-445
	@ 100 ºC	mm2/s	20.2	19.78	ASTM D-445
Viscosity Index		-	112	108	ASTM D-2270
Flash Point, COC		ºC	252	242	ASTM D-92
Pour Point		ºC	-6	-6	ASTM D-97
Base Number		mg KOH/g	70.0	85.0	ASTM D-2896
Sulphated Ash		% wt.	7.75	8.8	ASTM D-874
Color		-	D8.0	&D8.0	ASTM D-1500
Product Code		-	4750	4780	-

last updated on